CERN Accelerating science

This website is no longer maintained. Its content may be obsolete. Please visit http://home.cern/ for current CERN information.

CERN Accelerating science

Towards a strategic plan for future muon colliders

A muon collider would zoom in on a narrow region of energy to uncover the physics phenomena that the LHC can't reveal on its own. It would provide a clear, unobstructed view of the subatomic world.

In the framework of the European Strategy Update on Particle Physics, a working group had been appointed by the CERN Directorate in September 2017 to review the status of muon collider activities. The group found that the muon collider is a very promising concept to reach high energies with high luminosities. Important R&D remains to be carried out but no major obstacle has been identified. The results are documented in a publication: “Muon Colliders” arXiv:1901.06150, submitted last December as an Input Document to the EPPSU.

In light of the positive evaluation, the main recommendations at the time were to set-up an international collaboration that will organize the effort on the development of both accelerators and detector while also defining the roadmap towards the next Strategy update. The collaboration should carry out a concrete R&D programme and produce a first Conceptual Design Report for a muon collider.

Since then the group has been acting de facto as a seed to revive international efforts to further explore the physics case and to start develop an R&D programme. The muon collider would be a unique lepton collider facility at the high-energy frontier.

Despite their attractive physics potential, muon colliders still represent significant challenges (both on the machine and the detector side) that call for a well-coordinated R&D effort. The main challenges of a muon collider design arise from the short muon lifetime, which is 2.2 μs at rest. Demanding technologies and innovative concepts are required to rapidly produce, accelerate and collide the dense muon bunches that are required to reach high luminosity. The decay of the muons and the produced secondaries also pose challenges for the accelerator complex and the detectors.

A preparatory meeting was held at CERN on April 10-11, before the Granada Open Symposium (Indico Link).  This workshop attracted the interest of about 50 participants discussing the physics benchmarks, the detector simulation, machine design and the technology issues towards a required R&D plan. A strategy plan with a possible timeline to reach the construction phase of such a challenging facility was elaborated, as it appears in the Physics Briefing Book (arXiv:1910.11775v1). 

 

As we are entering the closing phase of the EPPSU, a workshop was held at CERN on October 9-11 (Indico Link), bringing together more than 80 participants. The goal was to better coordinate the renewed efforts on future studies for a muon collider facility and address the new ideas and results achieved on the main areas where work is in progress: physics, detector and machine.

Ongoing work was reported on many physical and technical aspects. In addition, several teams from different countries reported on their past efforts and on their interest for new developments on muon-beams and Muon-Colliders. Discussions started to identify feasibility issues and possible synergies towards a feasible R&D plan, to start concrete actions to better organize the future steps and address priorities on key issues.   

This workshop was the ideal environment to widen the international effort and start launching a proto-collaboration to address the most challenging and crucial items of the field. With the same purpose, a proposal to support and enlarge the European and International community working on muon colliders has been submitted to the next European Innovation Pilot project call  INFRAINNOV-04-2020. The MUST - MUon colliders STrategy network – aims to organize the effort to design a muon collider facility and to get together the community to perform the required R&D.

So far two main muon collider concepts have been developed and proposed: in one the muons are generated using protons (MAP) while in the other using positrons (LEMMA).

As discussed during the workshop, careful studies have been done by the US Muon Accelerator Program (MAP) (see also:https://iopscience.iop.org/journal/1748-0221/page/extraproc46) launched in 2011 and terminated in 2014. The program focused on the development of high intensity muon accelerator technology for an advanced neutrino source, the "neutrino factory," as well as a potential future lepton collider.  The MAP research efforts were devoted to verifying the feasibility of the key technology elements required for such machines based on tertiary production of muons from a high power proton driver.  In this context, a minimum set of performance parameters for each stage of the accelerator chain were defined - i.e., for the proton driver, the front end (including a MW-class target operating in a solenoid capture magnet, decay channel, buncher and phase rotator sections), the cooling channel required to reduce the initial 6D-beam emittance by about 6 orders of magnitude within the lifetime of the muon beams, acceleration to the desired operating energy, and finally the storage rings for neutrino factory or muon collider storage applications. 

The novel scheme based on muon pairs production from a positron beam of about 45 GeV impinging on the electrons of a target, Low Emittance Muon Accelerator (LEMMA), requires to be studied in detail to demonstrate its feasibility. This method allows to produce boosted (produced at 22 GeV) lower emittance beams with, in principle, no need to cool them. The main drawback is the low production cross section that will limit the muon bunch intensity. This requires the conception of an artful solution to accumulate bunches of suitable intensity (109).  This challenging and innovative scheme still needs a full end-to-end design study of the whole complex, to prove its full feasibleness, as described in a recent paper (arXiv:1905.05747). A solid R&D programme to increase the muon beam quality as well as the current, and consequently the final luminosity, must be studied and put in place.

A muon collider represents the only elementary particle collider that can reach very high center-of-mass energies and luminosities. This is the result of the low level of beamstrahlung and synchrotron radiation compared to linear or circular electron-positron colliders. Moreover, its energy reach make muon collider competitive to proton-proton colliders for direct searches of new heavy particles. Furthermore, thanks to the fact that muons are elementary particles, physics measurements are not limited by the PDF uncertainties present at hadron collisions allowing for high-precision measurements.  As an example, a muon collider with a center-of-mass energy of 10 TeV or higher and an instantaneous luminosity of the order of 1035cm2s-1, could allow to produce enough double and triple Higgs boson events to measure directly the trilinear and quadrilinear self-couplings, enabling an accurate reconstruction of the shape of the Higgs boson potential.    

One session of the workshop was dedicated to the discussion of the beam-induced background effects on the detector and on the strategies to mitigate them. The stream of secondary and tertiary particles, from the muon decays, arriving to the interaction region poses a serious issue on the detector performance and, therefore, on the physics measurements. Without a specifically designed shielding, the occupancy in the tracking system and in the first layers of the calorimeter will be unacceptable high. For the first time, it was proved that the beam-induced background can be managed to exploit the unprecedented physics capabilities of such a machine.

The MAP collaboration has proposed a pair of cone-shaped tungsten shields in the vicinity of the interaction point as the primary means of suppressing this beam-induced background. The cone opening angle is optimized depending on the beam energy and interaction region lattice.  The detailed study of the beam-induced background at a muon collider with the center-of-mass energy of 1.5 TeV, shows that these particles have on average low momentum compared to the hard processes of interest, and they are not synchronized with the beam crossing. Thus, the use of novel detector technologies with state-of-the-art timing resolution allows to reduce the detector occupancy to a manageable level providing a sufficient track (90% efficiency) and jet reconstruction (60% efficiency) performance. The full simulation in these conditions allowed to demonstrates that the Higgs boson decays to b quarks can be reconstructed despite the harsh environment as the event in figure demonstrates. The two b-jets are identifiable (red dots) among the beam-induced background. Significant improvements are expected from the application of advanced object-reconstruction and analysis techniques.

 

A potential workplan has been defined, based on the proposed timeline:

  • four years: baseline design established and cost scale of the project identified. A test facility to address the challenges that this baseline has to be designed.
  • six years: construct and operate a test facility.
  • four years: optimise design and project cost to launch a technical design

It appears reasonable to construct a muon collider in energy stages. A potential first stage could operate at a 3 TeV centre-of-mass energy. Such a facility could be implemented at CERN and reuse existing infrastructure. It may in particular be possible to use the LHC tunnel to house the largest part of the complex, the muon accelerator. A second energy stage could be 14 TeV. This facility is more demanding and would profit from the experience of the implementation of the first stage. Lower energies could also be explored. However, the strength of the muon collider appears more pronounced at high energies. It is the only concept in which the luminosity per beam power can naturally scale up with energy. In contrast, in linear colliders the luminosity per beam power is in first order independent of the collision energy.

An on-going international effort is now preparing a plan to address the critical key challenges, required to timely start a focused R&D programme. A preliminary R&D list will be compiled by the end of the year. A strong recommendation for a vigorous R&D programme on Muon Colliders will be key to start the international collaboration to develop this unique opportunity for High Energy Physics.

 
Athena Papageorgiou Koufidou, Livia Lapadatescu (CERN)
HIE-ISOLDE: challenges and future plans
15 Dec 2017

HIE-ISOLDE: challenges and future plans

HIE-ISOLDE advances the high energy frontier of the facility.

Yiota Foka (CERN)
Master Class captivates the next generation of scientists
11 Jul 2019

Master Class captivates the next generation of scientists

CERN, DKFZ Heidelberg and GSI Darmstadt engage the next generation of scientists through a hands-on experience on particle therapy.

Francisco Sanchez Galan
P8 towards HL-LHC thanks to a new absorber
20 Oct 2019

P8 towards HL-LHC thanks to a new absorber

The first definitive component of the High-Luminosity LHC has been installed, in a prime example of collaboration across different groups.

Discussing a future strategy for muon colliders

Fig.1: Some participants of the ARIES WP6 Workshop on Muon Colliders. (Credit: CERN)

On 2-3 July 2018 a muon collider workshop at the University of Padua attracted 78 experts from Europe and the US, as illustrated in Figs.1 and 2. This workshop was the second event organized in the frame of ARIES Work Package 6.6, following the Photon Beams Workshop in November 2017.

Setting the stage, Carlo Rubbia, from CERN and INFN, the recipient of the 1984 Nobel Prize for Physics, called for an initial cooling experiment to demonstrate muon cooling and the merits of parametric ionization cooling. He pointed out that the facility would comprise a ring at the scale of the PS, and hinted at the ESS being the ideal place for a muon-beam facility in Europe. Recognizing the muon colliders as a project of reasonable cost and reasonably fast, he admonished the audience to pursue scientific work instead of “PowerPoint studies”.

BNL’s Mark Palmer summarized the results of the US MAP studies. In particular he described the design of the facilities NuSTORM, and NuMAX, which are short and long baseline options, respectively, with enormous capabilities for precision physics. A multi-TeV muon collider would fit on the FNAL site, and he also discussed alternative options for a muon collider in the LHC tunnel. The MAP study had considered 10 T dipoles, or about 1000 turns decay time. Similar to the first speaker, Mark’s recommended strategy was to build NuSTORM and pursue a cooling demonstration. The full physics performance and achievable resolution need to be analyzed.  The preferred scenarios is a programme which culminates in a muon collider and which does exciting science all along the way.

Fig. 2: A few snapshots from the ARIES muon collider workshop in Padua. (Credit: CERN)

Ken Long from Imperial College reported the excellent results of the MICE cooling experiment (see CERN Courier Feature article, 9 July 2018). A novel emittance measurement technique had to be developed for MICE, which achieved a percent level precision.

A general consensus was reached that the steps forward should include the design and implementation of a 6D cooling experiment, and the establishment of a particle-physics programme based on high-intensity, high-energy muon beam, e.g. NuSTORM, presented by Jaroslav Pasternak, also from Imperial College.

Scott Berg of BNL pointed out that the matching problem for multiple cooling cells ought to be addressed.

In addition to the classical based muon production approach where high-intensity proton beams are shot on a target for pion generation, three alternative schemes are recently being explored, under the names “Gamma Factory”, “muon photocathode” and “LEMMA”.

Witek Krasny, from LPNHE Paris and CERN, introduced the “Gamma Factory,” where partially stripped heavy ion beams at high energy are collided with laser or FEL pulse. He highlighted three specific scenarios for producing polarized leptons (muons or positrons) using the Gamma Factory concept, and the associated ongoing SPS experiments. A breakthrough scheme with Pb+79 ions avoids the double excitation of electrons into the continuum.

Camilla Curatolo, from INFN Padova discussed a “muon photocathode”, which could be realized in Hadron Photon Collisions using an FEL. To study such a scheme she developed a dedicated event generator. For an FCC-based example, the normalized emittance would be less than 1 micron. The proton-gamma luminosity could be 1038/cm2/s. Muon accumulation and muon polarization are to be considered.

Manuela Boscolo from INFN Frascati presented the LEMMA scheme, where 45 GeV positrons circulating in a storage ring annihilate on a thin internal target, resulting in muon production. The positron beams lose several tens of MW energy passing through the target, made e.g. from beryllium, carbon, or hydrogen. About 200 kW of this power is deposited inside the target. Target survival is an open question. Liquid targets or rotating targets are among the options proposed. The workshop participants agreed on the need for experimental target tests.

Oscar Blanco from INFN-LNF reported on the muon accumulator ring. He pointed out that the muon beam emittance is limited by multiple scattering in the annihilation target. Citing Daniel Schulte of CERN, he also showed that for a 3 mm Be target the minimum normalized emittance is 600 nm, significantly larger than the 40 nm emittance previously assumed.

Simone Liuzzo of ESRF explained that, for LEMMA, more than 120 MW of synchrotron radiation are emitted in a 6.2 km positron ring. For a 27 km ring the synchrotron-radiation power drops below 30 MW. Frank Zimmermann of CERN highlighted that this power becomes even lower if the 100 km FCC-ee ring is employed, which serendipitously, thanks to its Z-pole running mode, already offers the right beam energy.

Intriguingly, Francesco Collamati, from INFN Roma, showed that the abundant bremsstrahlung photons which are equally emitted from the target can be used to generate more positrons, leading to a self-amplification of the positron beam, which could solve the challenge of generating positrons at the rate required for LEMMA.

Susanna Guiducci from INFN-LNF reviewed the state of the art in positron sources, which would be an integral part of LEMMA.

Daniel Schulte of CERN discussed the potential use for muon-collider R&D of an experimental programme using electron beams from the CERN SPS, with a CLIC like injector. He underlined that plasma acceleration is a perfect match for muons, which typically are of low intensity and fairly large emittance, arguing “if it is not suitable here, plasma acceleration probably cannot be used for any other type of collider”.

Scott Berg of BNL and Alex Bogacz from JLAB discussed options for muon acceleration, including the FFA accelerator prototype CBETA under construction at Cornell (see also the recent first ever experimental demonstration of muon radiofrequency acceleration at J-PARC, CERN Courier 9 July 2018).

In an exceptional remote presentation of this workshop, David Neuffer of FNAL, presented the fascinating option of a 14 TeV muon collider in LHC tunnel, which could be a cost-effective approach for reaching the ten-TeV scale in lepton collisions. The proposal is illustrated in Fig. 3. Upon request, he also detailed the three laws of beam physics.


Fig. 3: A 14 TeV muon collider in the LHC tunnel. (Credit: D. Neuffer and V. Shiltsev)

Daniel Kaplan of IIT reviewed limits from neutrino radiation. Concerning the next steps, he also recalled that “you don’t get tenure at Columbia University by saving government money”.

Frank Zimmermann, of CERN, sketched a possible upgrade of the FCC lepton and hadron-collider complex to a high-energy muon collider, using a combination of Gramma Factory and LEMMA concepts – Fig. 4. He showed that for various reasons and in view of the scaling laws – which call for ring of large circumference and with high magnetic field – the FCC is the ideal basis for a future 100 TeV muon collider.


Fig. 4: A 100 TeV muon collider, “FCC-μμ∀, in one of the FCC-hh rings, with e+ production from a Gamma Factory using partially stripped ion beams circulating in the other FCC-hh ring, and with LEMMA type muon production from a positron beam stored in one of the 45 GeV FCC-ee rings (Credit: Frank Zimmermann).

Jean-Pierre Delahaye of CERN (retired) compared the performance of proposed future colliders, introducing two figures of merit, the luminosity per construction cost and the luminosity power electrical power. He showed that the FCC-ee was the best of all options, while the figures of the muon collider extended all across the figure-of-merit plane from the worst (muon Higgs factory) to the best (multi-TeV muon collider) – see Fig. 5.


Fig. 5: Cost figure of merit versus power figure of merit for future lepton colliders (Credit: Jean-Pierre Delahaye).

Alain Blondel from the University of Geneva pointed out that luminosity measurement techniques for muon colliders need to be worked out. 

Mario Greco from Roma Tre highlighted the importance of QED radiative effects for a precision study of the Higgs pole line shape and the signal-to-background ration, both at a Higgs factory muon collider and at the FCC-ee.

At the end of the workshop, Nadia Pastrone, from INFN Torino, the coordinator the European muon collider study group, drew some enthusiastic conclusions and discussed the muon-collider input to the European Strategy Update.

Massimo Sorbi (CERN, INFN), Marco Statera (INFN) and Ezio Todesco (CERN)
A new step towards successful MgB2 superconducting coils
12 Mar 2018

A new step towards successful MgB2 superconducting coils

MgB2 coil successfully tested at LASA for the round coil superferric magnet correctors

Ricardo Torres (University of Liverpool)
The Tale of Two Tunnels
10 Dec 2018

The Tale of Two Tunnels

Liverpool will be turned into a particle accelerator exhibition.

Anaïs Schaeffer (CERN)
 HL-LHC equipment installed on both sides of the ALICE experiment
24 Jul 2020

HL-LHC equipment installed on both sides of the ALICE experiment

Novel cryostat units have been installed for the High-Luminosity LHC to allow insertion of room-temperature collimators in the LHC’s 1.9 K cryostats.